...
- PoE auf allen Ports aktiv (autodetect = Auch nicht PoE kann angeschlossen werden)
- Firmware-Update macht Probleme (Alte Firmware auf dem Gerät)
- SSH + Web aktiviert
- Benutzername: rw (ro für nur lesend), Passwort haben Matthias Walther und Sebastian Danek
- Passwort setzen: cli password read-only; cli password read-write; cli password serial local; cli password telnet local; save config
VLan
| ID | Bezeichnung | Ports |
|---|---|---|
| 100 | Management | 1, 2, 3, 5, 23, 24 |
| 401 | 201_D16_Client (Standort 201) | 1, 2 |
| 501 | 201_D16_Mesh (Standort 201) | 1, 2, 4 |
| 601 | RF_BEZHAW | 1, 3, 5 |
| 602 | RF_BEZGEI | 1, 3, 5 |
...
| Codeblock |
|---|
enable configure terminal telnet-access logging all cli password switch serial local cli password switch telnet local ip default-gateway 192.168.1.1 ip address switch 192.168.201.1 ip address netmask 255.255.0.0 ssh ssl spanning-tree port-mode auto vlan create 100, 401, 501, 601, 602 type port 1 vlan name 100 "Management" vlan name 401 "201_D16_Client" vlan name 501 "201_D16_Mesh" vlan name 601 "RF_BEZHAW" vlan name 602 "RF_BEZGEI" vlan ports 1-20-3 tagging tagAll filter-untagged-frame enable vlan ports 4 tagging unTagPvidOnly vlan ports 255-24 tagging tagAll filter-untagged-frame enable ####vlan ports 1 pvid 1 vlan ports 2 tagging 100,401,501 filter-untagged-frame enable ####vlan ports 4 pvid 501 vlan configcontrol flexible vlan members 1 NONE vlan members 100 1-3,5,23-24 vlan members 401 1-2,23-24 vlan members 501 1-2,4,23-24 vlan members 601 1,3,23-24 vlan members 602 1,3,23-24 vlan ports 1 pvid 1 vlan ports 4 pvid 501 vlan configcontrol automatic interface FastEthernet ALL exit |
...